|
|
Build Your Online Product Catalogs?
| Product Name: |
Masonry Mesh for Brick Wall Reinforcement
|
| Supply Ability: |
|
| Related proudcts |
trench mesh, |
| Specifications |
trench mesh |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
Ladder, truss, T shape or brick welded mesh
Masonry mesh, also called masonry wall reinforced mesh, is used for concrete construction reinforcement, normally used for the wall reinforcement. It is a welded and fabricated steel reinforcing structure which is laid in the bed joint to strengthen masonry panels without thickening the wall. It can prevent or reduce cracking in walls by bonding the masonry units together so as to strengthen the masonry panel where it is installed.
Features
Welded spots of warp wire and weft wire are on the same surface.
It increases lateral flexural strength and performance of masonry walls under various stresses.
It improves resistance to water penetration and shrinkage cracking of masonry walls.
Variety according to shapes
Ladder mesh reinforcement.
Truss mesh reinforcement.
T shape masonry mesh reinforcement.
Brick welded mesh reinforcement.
Different materials and surface treatment
Material: Low carbon steel wire, stainless steel wire, galvanized steel wire.
Welded before electric-galvanized.
Welded after electric-galvanized.
Welded before hot dipped galvanized.
Welded after hot dipped galvanized.
Welded by stainless steel wire.
Ladder mesh reinforcement
Wire diameter: 2.5mm - 8.0mm.
Standard length: 10' (3.05m).
Width: 50mm, 100mm, 150mm, 200mm, 250mm, 300mm.
Cross wires are 300mm to 400mm apart.
One ladder shape reinforcing mesh
Ladder mesh reinforcement used for masonry wall in building industry
Truss mesh reinforcement
Wire diameter: 2.5mm - 8.0mm.
Standard length: 3.05m.
Width: 50mm, 100mm, 150mm, 200mm, 250mm, 300mm.
Type: two longitudinal rods; three longitudinal rods; four longitudinal rods.
Three truss shape meshes with two, three, four longitudinal rods
Truss mesh with side to side rods and three or four longitudinal rods performs better bonding performance
T shape masonry mesh
Wire diameter: 2.5mm - 8.0mm.
Typical use: it can be used for brick wall corner reinforcement because of its typical T shape.
A bundle of T shape |
| Company: |
ABCP steel reinforcement products Co., Ltd.
|
| Contact: |
Mr. hui zhag |
| Address: |
NO. 127 Yuhua road, Anping County, Hengshui City, Hebei Province, China |
| Postcode: |
053600 |
| Tel: |
8631853625651 |
| Fax: |
8631853625651 |
| E-mail: |
|
|
|
|
Home
